February 3, 2023
How To Apply Builder Gel With Tips?

How to apply builder gel with tips – You can find lots of nail art tutorials online, but if you’re new to the world of gel nails, then the terminology and specific processes involved can be a little confusing. In this article, we’ll look at how to apply builder gel with tips and consider some of the important factors that you need to consider before beginning your project.

Prep The Nails

The first step is to prep the nails. You will need to remove any polish, oils, or debris from the nail surface. Once the nails are clean, you will need to file them down. Be sure to file in one direction to avoid damaging the nail.

Next, you will need to push back the cuticles. You can do this with a cuticle pusher or an orange stick wrapped in cotton. Finally, you will need to buff the nails to create a smooth surface for the gel to adhere to.

Choose The Right LED Light

Applying builder gel with tips is not as difficult as it may seem. You will need to find the right LED light that suits your needs. The following tips will help you choose the right LED light for your builder gel application.

– Look for an LED light that has a high output. This will ensure that your builder gel is cured correctly.

– Make sure the LED light has a wide beam angle. This will help to cure the builder gel evenly.

– Choose an LED light that is portable and easy to use. This will make it easier to apply builder gel with tips.

– Consider the price of the LED light before making a purchase. You will be able to stay within your budget this way.

Lay Down A Base Coat Of GELISH Foundation (Or Foundation Gel)

The first step is to lay down a base coat of GELISH Foundation (or Foundation gel). This will help the builder gel adhere to your nails and create a smoothness. Even surface Apply a thin layer of builder gel next. Be sure to avoid getting any gel on your cuticles or skin, as this can cause the gel to lift. Once you have applied the builder gel, cure it under a UV or LED light for 2 minutes.

Finish With Topcoat, Place Cushion Wedge Under The Nail

Remove any polish from your nails and clean them. Next, apply a thin layer of builder gel to your nails. Be sure to cure the gel under a UV or LED light. Once the gel is cured, apply another layer of builder gel and fix it again. Repeat this process until you have the desired gel thickness on your nails. Finally, finish with a top coat and cure once more.

Repeat Process On All Fingers

  1. After you have applied the base coat, it’s time to start applying the builder gel.
  2. For best results, use a thin layer of gel.
  3. Start by applying the gel to your thumb and then move on to your other fingers.
  4. Apply the gel evenly and avoid getting any on your cuticles or skin.
  5. Once you have applied the gel to all of your fingers, cure them under a UV or LED light for 2-3 minutes.
  6. After they have cured, apply a second layer of gel and cure again for 2-3 minutes.

Cure Under LED Light For 30 Seconds

After you have applied your base coat, it’s time to apply the builder gel. You will need to cure this under LED light for 30 seconds. Here are a few tips to help you with this process:

-Start by applying a thin layer of builder gel to your nails.

-Cure this layer under LED light for 30 seconds.

– The process can be repeated until the desired thickness is achieved.

-Remember to cap the free edge of your nails to ensure that the gel adheres properly.

-Once you are happy with the thickness of the gel, cure one final time for 30 seconds.

Apply Cuticle Oil (Optional)

Before doing anything, you should always make sure your cuticles are nice and moisturized. This will help the gel adhere better to your nails and prevent damage to your cuticles during the application process. Simply apply a few drops of oil to each nail and massage it for a minute or two. You can then proceed with the rest of your manicure routine.


Applying builder gel is not as difficult as one might think. By following the simple steps outlined in this blog post, you can achieve a professional-looking manicure at home. Remember to start with clean, dry nails and to apply the gel in thin coats. If you take your time and are careful, you can create a beautiful set of nails that will last for weeks.


Leave a Reply

Your email address will not be published. Required fields are marked *